Indicator switcch

A quick check of the parts books for the 400 to 405 confirmed that Bristol used the Lucas 031046 indicator switch shown on the bottom of the last page this is a mechanical electrical switch as opposed to the Lucas 31250 on offer through a few suppliers who say its interchangeable with the original unit, this could well be the case BUT its a vacuum operated unit so not a straight forward alternative fit, this unit is also shown in beölow.

Lucas-Lighting-Direction-Indicator-Switch

400 sidelights

The Bristol 400 side lamp was Lucas type 1145 and part number 52070A (chrome plated body). That was a continued use of a pre-war design of lamp (type 1145, sometimes with a black finish body), which itself was a variation on a similar but larger/longer lamp of the same style that was introduced in about 1935 (Type 1150, usually chrome plated body – used by Humber on their 12 and 18 HP models from 1935 to 37)

A similar lamp was used by Ford on their English built V8 models from about 1935 onwards. That was probably made by Butlers and is quite like Lucas 1145 at a glance but shares no parts with it (Lucas lenses are horizontally ribbed, Ford lenses have raised lumps on either side of a central groove)

Lucas 1145 was used as follows for production models (other occasional uses would probably have been seen from coachbuilders or on specials):

  • Bristol, to 1950
  • Commer, 30 cwt and 2-to-6-ton, normal control (Superpoise), 1939 to 1947 (with a likely pause in the use of that lamp during the war on the equivalent military requirement models)
  • Lea-Francis, 1948
  • Vauxhall Big Six, 1934 to 1936

(Note that the non-Lucas information has not yet been checked against documentation)

I have attached two small photos showing out of date images from eBay auction listings.

Hugh Boultbee

Bristol 400 in The Automobile magazine

In the November 2022 issue of The Automobile

NO ORDINARY BRISTOL Ordered new by the chairman of the Bristol Aeroplane Company, then driven for a decade by arch-enthusiast Christopher Balfour, then uprated and campaigned in hill climbs and sprints by its next owner, this 1948 Bristol 400 is now in the hands of a young enthusiast. Toby Bruce tells its story……..

Bristol Handbooks & Manuals

In order to improve accessibility we have now put all the manuals (Instruction Manuals, Spares Handbooks and Workshop Manuals) into a password-protected dedicated area in the Archive under Bristol Manuals.

Note: You have be logged in to access this area.

Glove box lock

Glove box locks can be obtained from AH Spares for £88 each but reported to be very good quality
Click Lock to order

Cylinder Head Gaskets for 6 Cylinder Engines

Your first port of call for these is of course Pegasus Parts

Other suppliers are:

  • Johnson Gaskets – contact Robert (Bob ) Johnson – +44 (0)1274 682298

Bristol 400 indicator switch lever

Mitchell Motors can supply Bristol 400 indicator switch levers

Contact

Mitchell Motors, 
Chicklade, Hindon, 
Salisbury, 
Wiltshire SP3 5SS
Telephone: 01747 820223
Email: andrew.mitchell@mitchellmotors.co.uk

Dashboards

There are some wonderfully glossy dashboards around on some early Bristol’s but probably few if any came out of the factory like that, the same being true for a lot on other quality cars of that period but they do look rather nice so if that is what you fancy go for it.

If you want a more toned down finish however Antique Oil produces very good results especially if you give it five or six coats applied with a soft cloth, it gives more of a satin finish and is very easy to refresh every few years.

If you want to go the gloss route some of the finishes designed for boats are very durable and easy to apply.

(Adapted from a post in the Old Forum)