Please or Register to create posts and topics.

408 and later brake servo/booster help needed.

My 408 has been modified to split the braking circuit in two for safety. There's a dual master cylinder that activates two separate servos/boosters. One servo powers the front calipers and the other powers the rear. The servos are rated at 1.9:1 boost. I am happy with the braking distances but the pedal effort is very high. I believe the 408 and 409 had single circuit/one booster setups but the 410 introduced split circuits with two boosters.

Does anybody know, or have experience, of what boost ratio should be used for each of the two circuits? Should I be looking at 3x or 4x boot? Should the front be boosted more than the rear? The current servos are Moss Motors part no. 117-312. They are by Powertune whose part number is RLE72696 (made in China!) If I need to replace them, what exact product numbers should I be looking at buying, please? LR18230 available from JustJags have been suggested by a fellow owner.

Thanks for any help.
David
--
David Womby